Owner manual

Chapter 7
______________________________________________________________________
_____________________________________________________________________________
BE6028-14 3434i SF6 Leak Detector LumaSense Technologies A/S
Page 84 of 191
Environment branch
12. Press S3 to enter the Environment branch.
13. Use the select push-buttons to select the desired flushing
mode.
If you select Auto, go to step 16.
If you select Fixed Time, go to step 14.
14. Use the direction push-buttons to define the Chamber Flushing
Time.
15. Use the select push-buttons to select Tube Flushing.
If you don’t want tube flushing, select NO and go to step 17.
If you select tube flushing, use the direction push-buttons to
define the flushing time and go to step 17.
16. Use the direction push-buttons to select the desired sample
tube length and move on to the next display.
17. Use the direction push-buttons to select the desired
normalization temperature.
See section 7.1 for details about the normalization options.
When step 17 is completed, the display returns to the top of the
MEASUREMENT branch.
Press p to go to the top of the Set-up Tree.
If you want measurement data presented as averaged concentration
values, then go to step 19. If you want your measurement data
presented as sample concentration values, then press SET-UP to
exit the set-up function.
Format branch
If you are starting here, press SET-UP:
18. Press S2 to enter the FORMAT branch.
19. Use the direction push-buttons to enter the correct averaging
period.
20. Use the select push-buttons to choose if you want to print each
gas.
If you select Yes, go to step 21.
If you select No, go to step 22.