Owner manual

Chapter 4
______________________________________________________________________
_____________________________________________________________________________
BE6028-14 3434i SF6 Leak Detector LumaSense Technologies A/S
Page 49 of 191
WATER: MAX 8.55E+00 µ 8.15+00
MIN 7.01E+00 σ 816E-03
W: WATER VAPOUR: 971.88mBar
2014-01-16 09:50:32 _________ 7.39Tdew
W: WATER VAPOUR: 971.88mBar
2014-01-16 09:51:33 ________ 7.49Tdew
5. Press u.
This causes the display to jump over to the list of measurement
results for gas A. The following text appears:
A:
Sulphur hexafluoride
972.06 mBar
2014-01-16 09:51:33 ___________ 7.43 mg/m3
By using p and q you can now scroll through the list of
measurement results for gas A.
If you do not wish to view the results anymore, press
↵
, this acts as
a “go to head” function. The following text appears:
A: 7.42E+00 B:__________ C:___________
D: _________ E:__________ W: 8.13+00
4.3.8 Stopping a Monitoring Task
1. Let the Monitor, monitor for a total period of about 30 minutes
and then press MEASURE.
The following text will appear on the screen:
If you pressed MEASURE accidentally, this screen enables you to
cancel the request to stop the monitoring task in progress – by
pressing S1.
2. Press S3 to stop the task.
STOP MONITORING TASK ?
NO YES