Owner manual

Chapter 4
______________________________________________________________________
_____________________________________________________________________________
BE6028-14 3434i SF6 Leak Detector LumaSense Technologies A/S
Page 40 of 191
f. Use the direction keys to define the normalization temperature:
and to increase and decrease the numbers, respectively; t and
u to move the cursor across the fields.
g. Press
to select displayed temperature.
The display screen then jumps to the “head” of the MEASUREMENT
branch of the Set-Up Tree and the following text is shown:
Fixed Time Option
a. Press S3, and the screen displays the following text.
b. Press
.
c. Use the direction keys to define the chamber flushing time.
Note: the range of acceptable values for chamber flushing ranges
from 2s to 60s, increasing in 1s intervals.
d. Press
to select displayed flushing time, and the following text is
displayed.
e. Press S3 to enable sample tube flushing. The screen displays the
following text.
SELECT MEASUREMENT SET-UP BRANCH
MONITORING TASK ENVIRONMENT
CHAMBER FLUSHING TIME 8 s
PRESS ENTER TO CHANGE VALUE
TUBE FLUSHING ?
NO YES