Owner manual

Chapter 2
______________________________________________________________________
_____________________________________________________________________________
BE6028-14 3434i SF6 Leak Detector LumaSense Technologies A/S
Page 24 of 191
These settings are to be used to change user level or password the
first time.
2.6.2 Changing the Password
In order to change the Password Press the Lock function push
button on the front of the Monitor.
The following text is displayed.
Press S3 “CHANGE PASSWORD”
The following text appears.
1. Press ↵ to change value.
The following text appears.
2. Enter the old Password using the ▲ and ▼ keys.
3. Press ↵.
The following text appears.
4. Type in the new Password using the ▲ and ▼ keys.
5. Press ↵.
2.6.3 Changing the User Level
In order to change the User Level Press the Lock function push
button on the front of the Monitor
CURRENT USER LEVEL IS X
CHANGE USER LEVEL CHANGE PASSWORD
ENTER PASSWORD "*****"
PRESS ENTER TO CHANGE VALUE
PASSWORD IS "*****"
PRESS ENTER TO CHANGE VALUE
ENTER PASSWORD "*****"
CANCEL DEFAULT