Owner manual

Chapter 10
______________________________________________________________________
_____________________________________________________________________________
BE6028-14 3434i SF6 Leak Detector LumaSense Technologies A/S
Page 125 of 191
10.7 Printing-out Data from the Monitor
Before data can be printed out from the Monitor, the communication
parameters must be checked/changed. This is explained in section
10.3.1 for RS-232 communication and in section 10.3.2 for the
Ethernet communication. The text line terminator must be set (see
section 10.4) before printing can proceed.
It is also necessary to define the averaging period if the AVERAGE
option is selected. Setting the Data Logging function is described in
section 10.5.
10.7.1 Starting a Print-out
Press PRINT and then one of select push-buttons S1 S2 or S3
depending on which data block you wish to print-out.
10.7.2 Stopping a Print-out which is in Progress
If a print-out is in progress and you wish to stop it, then the
following steps need to be followed:
1. Press the PRINT button on the Monitor’s front panel.
The following text will appear on the display:
PRINT ABORTING
PLEASE WAIT
The printer will stop printing data.
2. Use the Line Feed function on the printer if the paper is not
ejected automatically.