Instructions / Assembly

3
Installation Instructions - Crosstour MAXX
Locking Hinges
Push-in
Connectors
Connect all Ground Wires First
Front Housing
Ground
Back Box Ground Supply Ground
DOOR INSTALLATION
6. Ensure all electrical wires and connections are secured
in the back box, re-install door and tighten door screw
to 15-20 in-lbs.
MAINTENANCE
ote:N A regular maintenance schedule should be
followed to retain optimal light output and thermal
performance. Optical lens cleaning should be
performed with a clean dry cloth to remove any
dust or other contaminants. Additional lens cleaning
should be performed with non-abrasive acrylic
cleanser. Remove any dirt, leaves, or other foreign
debris from the housing and fins. Clean water may
be used to flush the fins.
Wiring Diagrams
Without Photocontrol
Figure 4.
Load (Black)
Supply Line (Black)
Neutral (White)
Supply Neutral (White)
Factory Wired
Driver to LED
Driver
COOPER LIGHTING SOLUTIONS IB514001EN Installation instructions