Installation Manual

2
EATON IB514009EN Installation instructions
Installation Instructions - Crosstour Escutcheon Plates
INSTALLATION
Crosstour Luminiares (Figures 1 - 4)
1. Install XTOR luminaire to wall per luminaire instructions.
2. Install escutcheon plates around XTOR luminaire. XTOR
escutcheon plates can be installed vertically
(Figure 3 and Figure 4) or horizontally
(Figure 1 and Figure 2).
3. Use anchor bolts (supplied by others) to attach
escutcheon plates to wall.
ote:N XTOR front cover may need to be removed to provide
access to bottom two screw holes.
Figure 1.
Figure 2.
Figure 3.
Figure 4.
17-1/2”
[445mm]
10”
[254mm]