Specification Sheet

XTOR
CROSSTOUR LED
APPLICATIONS:
WALL / SURFACE
POST / BOLLARD
LOW LEVEL
FLOODLIGHT
INVERTED
SITE LIGHTING
Lumark
SPECIFICATION FEATURES
Construction
Slim, low-profile LED design
with rugged one-piece, die-cast
aluminum hinged removable door
and back box. Matching housing
styles incorporate both a small
and medium design. The small
housing is available in 12W, 18W
and 26W. The medium housing
is available in the 38W model.
Patented secure lock hinge feature
allows for safe and easy tool-less
electrical connections with the
supplied push-in connectors. Back
box includes three half-inch, NPT
threaded conduit entry points. The
universal back box supports both
the small and medium forms and
mounts to standard 3-1/2” to 4”
round and octagonal, 4” square,
single gang and masonry junction
boxes. Key hole gasket allows
for adaptation to junction box or
wall. External fin design extracts
heat from the fixture surface. One-
piece silicone gasket seals door
and back box. Minimum 5” wide
pole for site lighting application.
Not recommended for car wash
applications.
Optical
Silicone sealed optical LED
chamber incorporates a custom
engineered mirrored anodized
reflector providing high-efficiency
illumination. Optical assembly
includes impact-resistant
tempered glass and meets IESNA
requirements for full cutoff
compliance. Available in seven
lumen packages; 5000K, 4000K and
3000K CCT.
Electrical
LED driver is mounted to the
die-cast housing for optimal heat
sinking. LED thermal management
system incorporates both
conduction and natural convection
to transfer heat rapidly away from
the LED source. 12W, 18W, 26W
and 38W series operate in -40°C to
40°C [-40°F to 104°F]. High ambient
50°C models available. Crosstour
luminaires maintain greater than
89% of initial light output after
72,000 hours of operation. Three
half-inch NPT threaded conduit
entry points allow for thru-branch
wiring. Back box is an authorized
electrical wiring compartment.
Integral LED electronic driver
incorporates surge protection. 120-
277V 50/60Hz or 347V 60Hz models.
Finish
Crosstour is protected with a
Super durable TGIC carbon
bronze or summit white polyester
powder coat paint. Super durable
TGIC powder coat paint finishes
withstand extreme climate
conditions while providing optimal
color and gloss retention of the
installed life.
Warranty
Five-year warranty.
TD514013EN
2017-07-25 12:21:59
The patented Lumark Crosstour
™
LED Wall Pack Series of luminaries
provides an architectural style with super bright, energy efficient LEDs.
The low-profile, rugged die-cast aluminum construction, universal back
box, stainless steel hardware along with a sealed and gasketed optical
compartment make the Crosstour impervious to contaminants. The
Crosstour wall luminaire is ideal for wall/surface, inverted mount for
façade/canopy illumination, post/bollard, site lighting, floodlight and low
level pathway illumination including stairs. Typical applications include
building entrances, multi-use facilities, apartment buildings, institutions,
schools, stairways and loading docks test.
DESCRIPTION
Catalog #
Type
Date
Project
Comments
Prepared by
12W, 18W, 26W
5-3/4" [146mm]
38W
6-5/8" [168mm]
12W, 18W, 26W
6-3/4" [171mm]
38W
8" [203mm]
12W, 18W, 26W
3-5/8" [92mm]
38W
4" [102mm]
DIMENSIONS
CERTIFICATION DATA
UL/cUL Wet Location Listed
LM79 / LM80 Compliant
ROHS Compliant
ADA Compliant
NOM Compliant Models
IP66 Ingressed Protection Rated
Title 24 Compliant
DesignLights Consortium
®
Qualified*
TECHNICAL DATA
40°C Maximum Ambient Temperature
External Supply Wiring 90°C Minimum
EPA
Effective Projected Area (Sq. Ft.):
XTOR1B, XT0R2B, XT0R3B=0.34
XTOR4B=0.45
SHIPPING DATA:
Approximate Net Weight:
3.7 – 5.25 lbs. [1.7 – 2.4 kgs.]
10" [254mm]
17-1/2" [445mm]
10"
[254mm]
17-1/2"
[445mm]
ESCUTCHEON PLATES
*www.designlights.org