Cut Sheet

XTOR
CROSSTOUR LED
APPLICATIONS:
WALL / SURFACE
POST / BOLLARD
LOW LEVEL
FLOODLIGHT
INVERTED
SITE LIGHTING
Lumark
SPECIFICATION FEATURES
Construction
Slim, low-profile LED design
with rugged one-piece, die-cast
aluminum hinged removable door
and back box. Matching housing
styles incorporate both a small and
large design. The small housing
is available in 7W and 18W. The
large housing is available in the
26W model. Patent pending secure
lock hinge feature allows for
safe and easy tool-less electrical
connections with the supplied
push-in connectors. Back box
includes three (3) half-inch, NPT
threaded conduit entry points. The
universal back box supports both
the small and large forms and
mounts to standard 3-1/2” to 4”
round and octagonal, 4” square,
single gang and masonry junction
boxes. Key hole gasket allows
for adaptation to junction box or
wall. External fin design extracts
heat from the fixture surface. One-
piece silicone gasket seals door
and back box. Minimum 5” wide
pole for site lighting application.
Not recommended for car wash
applications.
Optical
Silicone sealed optical LED
chamber incorporates a custom
engineered mirrored anodized
reflector providing high-efficiency
illumination. Optical assembly
includes impact-resistant
tempered glass and meets IESNA
requirements for full cutoff
compliance. Solid state LED
Crosstour luminaries are thermally
optimized with five (5) lumen
packages in cool 5000K or neutral
warm 3500K LED color temperature
(CCT).
Electrical
LED driver is mounted to the
die-cast housing for optimal heat
sinking. LED thermal management
system incorporates both
conduction and natural convection
to transfer heat rapidly away
from the LED source. 7W models
operate in -40°C to 40°C [-40°F
to 104°F]. 18W and 26W models
operate in -40°C to 40°C [-40°F to
104°F]. High ambient 50°C models
available. Crosstour luminaires
maintain greater than 90% of initial
light output after 72,000 hours
of operation. Three (3) half-inch
NPT threaded conduit entry points
allow for thru-branch wiring. Back
box is an authorized electrical
wiring compartment. Integral LED
electronic driver incorporates surge
protection. 120-277V 50/60Hz or
347V 60Hz models.
Finish
Crosstour is protected with a
Super durable TGIC carbon
bronze or summit white polyester
powder coat paint. Super durable
TGIC powder coat paint finishes
withstand extreme climate
conditions while providing optimal
color and gloss retention of the
installed life.
Warranty
Five-year warranty.
TD514013EN
2015-05-29 11:34:51
The patented Lumark Crosstour™ LED Wall Pack Series of luminaries
provides an architectural style with super bright, energy efficient LEDs.
The low-profile, rugged die-cast aluminum construction, universal back
box, stainless steel hardware along with a sealed and gasketed optical
compartment make the Crosstour impervious to contaminants. The
Crosstour wall luminaire is ideal for wall/surface, inverted mount for
façade/canopy illumination, post/bollard, site lighting, floodlight and low
level pathway illumination including stairs. Typical applications include
building entrances, multi-use facilities, apartment buildings, institutions,
schools, stairways and loading docks test.
DESCRIPTION
Catalog #
Type
Date
Project
Comments
Prepared by
7W & 18W
5-3/4" [146mm]
26W
6-5/8" [168mm]
7W & 18W
6-3/4" [171mm]
26W
8" [203mm]
7W & 18W
3-5/8" [92mm]
26W
4" [102mm]
DIMENSIONS
CERTIFICATION DATA
UL/cUL Wet Location Listed
LM79 / LM80 Compliant
ROHS Compliant
ADA Compliant
NOM Compliant Models
IP66 Ingressed Protection Rated
Title 24 Compliant
DesignLights Consortium® Qualified*
TECHNICAL DATA
40°C Maximum Ambient Temperature
External Supply Wiring 90°C Minimum
EPA
Effective Projected Area (Sq. Ft.):
XTOR1A/XT0R2A=0.34
XTOR3A=0.45
SHIPPING DATA:
Approximate Net Weight:
3.7 – 5.25 lbs. [1.7 – 2.4 kgs.]
*www.designlights.org
10" [254mm]
17-1/2" [445mm]
10"
[254mm]
17-1/2"
[445mm]
ESCUTCHEON PLATES