Cut Sheet

ManualsBrandsLumark ManualsFlood Lights - H.I.D. / CFL400W HPS Floodlight, Trunnion, Multi-Tap, Bronze

TRUNNION YOKE MOUNT DRILL PATTERN

NOTES: 1 Not available in 175W. 2 200, 250, 320, 350 & 400W only (Limited lamp availability, consult factory). 3 Medium-base socket for 150W & lower. 4 Pulse start

Metal Halide only. 5 Products also available in non-us voltages & 50Hz for international. 6 Multi-tap ballast 120/208/240/277V. 7 Triple-tap ballast 120/277/347V.

8 5-Tap ballast 120/208/240/277/480V. 400W Metal Halide only. 9 Add as suffix in the order shown. 10 Order separately, replace XX with color suffix.

11 Specifications and dimensions subject to change without notice.

Options

F1=Single Fuse (120, 277 or 347V)

F2=Double Fused (208, 240 or 480V)

Q=Quartz Restrike DC Bayonet Base (Hot Strike Only)

EM=Quartz Restrike (Cold Start with Time Delay)

EM/SC=Emergency Separate Circuit

PER=NEMA Twistlock Photocontrol Receptacle

C23=3' of 12-3 Cord, Prewired (Specify Single Voltage)

C42=2' of 14-3 Cord, Prewired (Specify Single Voltage)

C43=3' of 14-3 Cord, Prewired (Specify Single Voltage)

C63=3' of 16-3 Cord, Prewired (Specify Single Voltage)

LL=Lamp Included

Accessories

WG/WR=Wire Guard

VG/WR=Vandal Shield

RAB-XX=Right Angle Pipe Bracket For Slipfitters (Specify Color. BRZ is standard)

SAB-XX=Steel Angle Bracket For Trunnion (Specify Color. BRZ is standard)

OA/RA1014=Photoelectric Control, 120 Volt NEMA Type

OA/RA1016=Photoelectric Control, 105-285 Volt NEMA Type

OA/RA1027=Photoelectric Control, 480 Volt NEMA Type

PB120V=Button Photocontrol, 120V, Slipfitter Only

TV/WR=Top Visor

TYS-XX=Trunnion or Yoke Slipfitter for 2 3/8", 3", or 3 1/2" O.D. Tenon

COOPER LIGHTING - LUMARK

FLOODLIGHTING

558

COOPER LIGHTING

15 3/4"

[400mm]

14 7/8"

[378mm]

[51mm]

[152mm]

Slipfitter Mount

Yoke Mount

15"

[381mm]

[102mm]

[178mm]

13"

[330mm]

Trunnion Mount

ORDERING INFORMATION

SAMPLE NUMBER: MHWR-65Y-200-120V

Lamp Type

HP=High

Pressure

Sodium

MH=Metal

Halide

MP=Pulse

Start MH (CWA)

Series

WR=Warrior

Distribution

65=6x5

Mounting

S=Slipfitter

T=Trunnion

Y=Yoke

Lamp Wattage

100=100W

150=150W

175=175W

200=200W

250=250W

320=320W

400=400W

250/400=250/400W

(wired 250)

Voltage

120V

208V

240V

277V

347V

480V

MT=Multi-Tap

TT=Triple-Tap

5T=5-Tap

Options &

Accessories

(See Below)

NOTES: Options not available with stock products. Order Accessories as separate items for field installation.

Refer to standard ordering information to add options and accessories.

STOCK SAMPLE NUMBER (Lamp Included)

SAMPLE NUMBER: XS15

Series

X=Slipfitter

W=Trunnion

Lamp Type

S=High Pressure Sodium

M=Metal Halide

Lamp Wattage

15=150W

17=175W

25=250W

40=400W

Option

5T=5-Tap

For Pole Information Refer to Cooper Lighting Pole Section.

3 3/4" [95mm]

1 7/8"

[48mm]

7/8" [22mm]

dia. hole

[25mm]

9/16" [14mm]

dia. hole (2)

DIMENSIONS

• Corrosion-resistant

captive retaining screws

• Watertight die-cast

aluminum housing door

is finished in dark bronze

polyester powder coat.

Cast ridge for water tight

seal against gasketing

• Full circumference,

high-temperature

foam-in-place silicone

gasketing seals out

external contaminants

• Mogul-base porcelain

socket, except 150W and

below has medium-base

• High power factor ballast

with class H insulation.

Minimum starting

temperature is -40°C

(-40° F) for HPS and -30°C

(-20° F) for MH and MP

• Variable mountings of

either 3/16" galvanized

steel trunnion (shown

below) or integral

die-cast aluminum

slipfitter (shown in

photo to right). Slipfitter

fits 2 3/8" - 3" O.D. tenon.

Heavy-duty steel yoke

provides flexibility in

mounting and aiming

from a variety of surfaces

• Class I Div 2 Rated and

IP65 Rated

• Approximate net weight:

35 lbs. (16 kgs.)

DESCRIPTION

The Lumark Warrior offers a

variety of lamp and mounting

options in high pressure

sodium and metal halide, and

can be installed, lamped and

serviced with the most basic

tools. U.L. listed and labeled

for wet locations.

CSA certified.

WARRIOR

100-400W

High Pressure Sodium

Pulse Start Metal Halide

Metal Halide

SLIPFITTER-MOUNTED

TRUNNION-MOUNTED OR

YOKE-MOUNTED

FLOODLIGHT

LAMP TYPE WATTAGE

Metal Halide 100, 175, 250, 400W

Pulse Start Metal Halide 200, 250, 320, 400W

High Pressure Sodium

100, 150, 250, 400W

EPA-Effective Projected Area: 1.3 @ 45°