Cut Sheet

COOPER LIGHTING
WARNING: The use of unauthorized accessories such as banners, signs, cameras or pennants for which the pole was not designed voids the Cooper Lighting Pole Warranty and may result in pole failure causing serious
injury or property damage. Upon request, Cooper Lighting will supply information regarding total loading capacity. Cooper Lighting’s Pole Warranty is void unless poles are used and installed as a complete pole/luminaire
combination. This warranty specically excludes failure as the result of a third party act or omission, misuse, unanticipated uses, fatigue failure or similar phenomena resulting from induced vibration, harmonic oscillation
or resonance associated with movement of air currents around the product.
Specications and dimensions subject to change without notice. Consult your Cooper Lighting Representative or visit www.cooperlighting.com for available options, accessories and ordering information.
TENONS AND ADAPTERS
DIRECT MOUNT TENON ADAPTER (2" or 3")
Tenon Size
(Inches)
Fixture
Configuration
Type "M" Drill Pattern Type "E" Drill Pattern Type "C" Drill Pattern Type "A" Drill Pattern
2-3/8" O.D.
2-3/8" O.D.
2-3/8" O.D.
2-3/8" O.D.
2-3/8" O.D.
2-3/8" O.D.
2-3/8" O.D.
3" O.D.
3" O.D.
3" O.D.
3-1/2" O.D.
3-1/2" O.D.
3-1/2" O.D.
3-1/2" O.D.
3-1/2" O.D.
3-1/2" O.D.
3-1/2" O.D.
1 Fixture
2 Fixtures at 180°
3 Fixtures at 120°
4 Fixtures at 90°
2 Fixtures at 90°
3 Fixtures at 90°
2 Fixtures at 120°
1 Fixture
2 Fixtures at 180°
4 Fixtures at 90°
1 Fixture
2 Fixtures at 180°
3 Fixtures at 120°
4 Fixtures at 90°
2 Fixtures at 90°
3 Fixtures at 90°
2 Fixtures at 120°
MA1017
MA1018
MA1019
MA1045
MA1048
MA1049
MA1107
MA1020
MA1034
MA1043
MA1010
MA1011
MA1012
MA1013
MA1014
MA1016
MA1015
MA1101
MA1102
MA1103
MA1104
MA1105
MA1106
MA1116
MA1108
MA1109
MA1110
MA1111
MA1112
MA1113
MA1114
VA1033
VA1034
VA1035
VA1036
VA1037
VA1038
VA1039
VA1040
VA1041
VA1042
VA1043
VA1044
VA1045
VA1046
VA1019
VA1020
VA1021
VA1022
VA1023
VA1024
VA1025
VA1026
VA1027
VA1028
VA1029
VA1030
VA1031
VA1032
NOTES: Fitters for other tenon sizes available. Consult your Cooper Lighting Representative. Tenon adapter for thru-bolt mounted luminaires.
TENON REDUCER
Catalog
Number
1
Size (Inches)
TR30-2
TR35-2
TR35-3
TR40-2
TR40-3
TR40-3.5
3" O.D. to 2-3/8" O.D.
3-1/2" O.D. to 2-3/8" O.D.
3-1/2" O.D. to 3" O.D.
4" O.D. to 2-3/8" O.D.
4" O.D. to 3" O.D.
4" O.D. to 3-1/2" O.D.
NOTES: 1 Standard adapter is bronze painted steel. Mounting
hardware included.
REMOVABLE TENON FOR SQUARE STEEL POLE
Catalog
Number
1
Pole Size
(Inches)
Tenon Size
(Inches)
TASQ-4-2
TASQ-4-3
TASQ-5-2
TASQ-5-3
TASQ-6-2
TASQ-6-3
TASQ-4-3.5
TASQ-5-3.5
TASQ-6-3.5
4"
4"
5"
5"
6"
6"
4"
5"
6"
2-3/8" O.D.
3" O.D.
2-3/8" O.D.
3" O.D.
2-3/8" O.D.
3" O.D.
3-1/2" O.D.
3-1/2" O.D.
3-1/2" O.D.
NOTES: Includes thru bolts. Fits internally. Standard bronze painted.
12"
[305mm]
Set
Screws
Top Cap
TYPE “M” DRILLING
5"
[127mm]
5"
[127mm]
1/4"
[6mm]
4-1/2"
[114mm]
9/16" [14mm]
Diameter
Two places
through
ADH121638
SURFACE MOUNT BRACKETS
RIGHT ANGLE BRACKETS
Catalog Number
1
Tenon Size (Inches) Bracket Length (Inches)
RAB
RAB-V
RABX
2
RABX14
2
2-3/8" O.D.
2-3/8" O.D.
2-3/8" O.D.
2-3/8" O.D.
8"
14"
8"
14"
NOTES: 1 Standard nish is primed. Add sufx "G" for hot dip galvanize. Mounting hardware not included. Two Steel pole
mounting.
PARAPET BRACKET
Catalog Number
1
Tenon Size
(Inches)
Fixture Configuration
FA63 3" O.D. Single Parapet Mount
STEEL ANGLE BRACKET
Catalog Number
SAB
NOTES: Standard nish is hot dip galvanize.
Mounting hardware not included.
5"
[127mm]
5-1/2"
[140mm]
4-1/8"
[105mm]
20"
[508mm]
45°
15-1/2"
[394mm]
7/8"
[22mm]
Diameter
8-1/2"
[216mm]
14"
[356mm]
RAB RABV RABX / RABX14
9/16" [14mm]
Diameter
8"
[203mm]
8"
[203mm]
8-1/2"
[216mm]
or
14"
[356mm]
NOTE: Specifications and dimensions subject to change without notice.
Visit our web site at www.cooperlighting.com
Customer First Center 1121 Highway 74 South Peachtree City, GA 30269 770.486.4800 FAX [phone]