Specification Sheet

Specifications and
dimensions subject to
change without notice.
Eaton
1121 Highway 74 South
Peachtree City, GA 30269
P: 770-486-4800
www.eaton.com/lighting
TD506007EN
June 19, 2018 2:41 PM
NFFLD NIGHT FALCON
ORDERING INFORMATION
STOCK ORDERING INFORMATION
page 4
Stock Sample Number: NFFLD-C40-S
Series Light Engine Mounting Voltage
NFFLD=Night
Falcon
C25= 10,500 Nominal Lumens
C40= 16,900 Nominal Lumens
S= Slipfitter
T=Trunnion
[BLANK]=120-277V
347=347V
NOTES: Options not available with stock products. Order accessories as separate items for field installation. Refer to standard ordering infor-
mation to add options. Refer to In-Stock Guide for availability. Stock fixture is 4000K, non-dimming, 120-277V or 347V 6Hx6V, carbon bronze
only.
Sample Number: NFFLD-C40-E-UNV-66-S-CB-PER
Product Family
1
Light Engine
2
Driver
3
Voltage Distribution Mounting Color
NFFLD= Night Falcon
LED Floodlight
C25=10,500 Nominal Lumens
C40=16,900 Nominal Lumens
C55=20,000 Nominal Lumens
C70=24,000 Nominal Lumens
E=Non-Dimming
D=Dimming (0-10V)
UNV= 120-277V
347=347V
4
480=480V
4
66= NEMA 6H x 6V Wide
33= NEMA 3H x 3V Spot
5
S= Slipfitter
6
T=Trunnion
Y=Yoke
CB= Carbon Bronze (Standard)
BK=Black
BZ=Bronze
AP= Grey
WH=White
WHT= Summit White
DP= Dark Platinum
GM= Graphite Metallic
Options (Add as Suffix) Accessories (Order Separately)
12
7030=70 CRI / 3000K
7
7050=70 CRI / 5000K
7
7060=70 CRI / 5700K
7
PER=NEMA 3-PIN Twistlock Photocontrol Receptacle
PER7=NEMA 7-PIN Twistlock Photocontrol Receptacle
8
10K=10kV/10kA UL 1449 Surge Protective Device
D10=<10% Dimming
8
HA=50°C High Ambient Temperature
9
MS P/D I M - L12=Integrated Sensor for Dimming Operation, 8' - 12' Mounting Height
10, 11
MSP/DIM-L30=Integrated Sensor for Dimming Operation, 12' - 30' Mounting Height
10, 11
MS P-L12=Integrated Sensor for ON/OFF Operation, 8' - 12' Mounting Height
10, 11
MSP-L30=Integrated Sensor for ON/OFF Operation, 12' - 30' Mounting Height
10, 11
FA63=3" O.D. Surface Mount Bracket
13
OA1223=10kV/10kA UL 1449 Surge Protective Device Replacement
OA/RA1013=Photocontrol Shorting Cap
OA/R A1014=NEMA Photocontrol - 120V
OA/R A1016 =NEMA Photocontrol - Multi-Tap
OA/R A1027=NEMA Photocontrol - 480V
OA/RA1201=NEMA Photocontrol - 347V
RAB-XX=Right Angle Pipe Bracket for Slipfitter
SAB-XX=Steel Angle Bracket for Trunnion
TYS-XX=Slipfitter Adapter for 2-3/8", 3" or 3-1/2" O.D. Tenon
14
TS2/NFFLD-XX=Top and Side Visors
15
VS/NFFLD=Vandal Shield
15
WG/NFFLD=Wire Guard
15
ISHH-01=Integrated Sensor Programming Remote
WOLC-7P-10A=WaveLinx Outdoor Control Module (7-pin)
16
NOTES:
1. DesignLights Consortium
®
Qualified. Refer to www.designlights.org Qualified Products List under Family Models for details.
2. Standard 4000K CCT and minimum 70 CRI. Consult IES file for actual lumen output.
3. Consult factory for driver surge protection values.
4. Not recommended for use with ungrounded, delta configured systems.
5. Only available in C25 adn C40 light engines.
6. Fits 2-3/8" to 3" O.D. tenon, wire leads run through slipfitter.
7. Extended lead times apply. Use dedicated IES files for 3000K and 5700K when performing layouts. These files are published on the Night Falcon luminaire product page on the website.
8. Must order with dimming driver.
9. Not available with 3H x 3V spot distribution.
10. 0-10V dimming driver required. Integrated sensor option only available in slipfitter mounting.
11. Not available with Photocontrol.
12. Replace XX with color designation. Additional brackets and adaptors available on the poles product page on the website.
13. Not available with tenon mount.
14. Not available with slipfitter mount.
15. Cannot combine TS2 (Top and Side Visor), VS (Vandal Shield), or WG (Wire Guard), limited to one external guard per fixture.
16. Requires 7-pin NEMA twistlock photocontrol receptacle.