Cut Sheet

Specifications and
dimensions subject to
change without notice.
Eaton
1121 Highway 74 South
Peachtree City, GA 30269
P: 770-486-4800
www.eaton.com/lighting
TD506007EN
2017-06-20 14:29:38
NFFLD NIGHT FALCON
Sample Number: NFFLD-C40-E-UNV-66-S-CB-PER
Product Family Light Engine
1
Driver
2
Voltage DistributionMounting Color
NFFLD= Night Falcon
LED Floodlight
C25=10,500 Nominal Lumens
C40=16,900 Nominal Lumens
E=Non-Dimming
D=Dimming (0-10V)
UNV= 120-277V
347=347V
3
480=480V
3
66= NEMA 6H x 6V Wide
33= NEMA 3H x 3V Wide
S= Slipfi tter
4
T=Trunnion
Y=Yoke
CB= Carbon Bronze (Standard)
BK=Black
BZ=Bronze
AP= Grey
WH=White
WHT= Summit White
DP= Dark Platinum
GM= Graphite Metallic
Options (Add as Suffi x) Accessories (Order Separately)
9
7030=70 CRI / 3000K
5
7050=70 CRI / 5000K
5
7060=70 CRI / 5700K
5
PER=NEMA 3-PIN Twistlock Photocontrol Receptacle
PER7=NEMA 7-PIN Twistlock Photocontrol Receptacle
6
10K=10kV/10kA UL 1449 Surge Protective Device
HA=50°C High Ambient Temperature
D10=<10% Dimming
6
MSP/DIM-L12=Integrated Sensor for Dimming Operation, 8' - 12' Mounting Height
7, 8
MSP/DIM-L30=Integrated Sensor for Dimming Operation, 12' - 30' Mounting Height
7, 8
MSP-L12=Integrated Sensor for ON/OFF Operation, 8' - 12' Mounting Height
7, 8
MSP-L30=Integrated Sensor for ON/OFF Operation, 12' - 30' Mounting Height
7, 8
FA63=3" O.D. Surface Mount Bracket
10
OA1223=10kV/10kA UL 1449 Surge Protective Device Replacement
OA/RA1013=Photocontrol Shorting Cap
OA/RA1014=NEMA Photocontrol - 120V
OA/RA1016=NEMA Photocontrol - Multi-Tap
OA/RA1027=NEMA Photocontrol - 480V
OA/RA1201=NEMA Photocontrol - 347V
RAB-XX=Right Angle Pipe Bracket for Slipfi tter
SAB-XX=Steel Angle Bracket for Trunnion
TYS-XX=Slipfi tter Adapter for 2-3/8", 3" or 3-1/2" O.D. Tenon
11
TS2/NFFLD-XX=Top and Side Visors
12
VS/NFFLD=Vandal Shield
12
WG/NFFLD=Wire Guard
12
ISHH-01=Integrated Sensor Programming Remote
NOTES:
1.
Standard 4000K CCT and minimum 70 CRI. Consult IES fi le for actual lumen output.
2.
Consult factory for driver surge protection values.
3.
Not recommended for use with ungrounded, delta confi gured systems.
4.
Fits 2-3/8" to 3" O.D. tenon, wire leads run through slipfi tter.
5.
Extended lead times apply. Use dedicated IES fi les for 3000K and 5700K when performing layouts. These fi les are published on the Night Falcon luminaire product page on the website.
6.
Must order with dimming driver.
7.
0-10V dimming driver required. Integrated sensor option only available in slipfi tter mounting.
8.
Not available with Photocontrol.
9.
Replace XX with color designation. Additional brackets and adaptors available on the poles product page on the website.
1
0. Not available with tenon mount.
11
. Not available with slipfi tter mount.
12. Cannot combine TS2 (Top and Side Visor), VS (Vandal Shield), or WG (Wire Guard), limited to one external guard per fi xture.
ORDERING INFORMATION
Stock Sample Number: NFFLD-C40-S
Series Light Engine Mounting Voltage
NFFLD=Night Falcon C25= 10,500 Nominal Lumens
C40= 16,900 Nominal Lumens
S= Slipfi tter
T=Trunnion
[BLANK]=120-277V
347=347V
NOTES
: Options not available with stock products. Order accessories as separate items for fi eld installation. Refer to standard ordering information
to add options. Refer to In-Stock Guide for availability. Stock fi xture is 4000K, non-dimming, 120-277V or 347V 6Hx6V, carbon bronze only.
STOCK ORDERING INFORMATION