Cut Sheet

LAS Area Site
Lumark
PS514101EN page 3
October 22, 2020 12:49 PM
Energy and Performance Data (cont.)
Power and Lumens (LAS45)
Lumen Select Switch
Position 0
(Factory Preset)
1 2 3 4 5 6 7 8 9
Power (Watts) 152.7 135.4 119.7 99.2 89.5 79.2 75.2 68.8 29.3 29.3
Input Current @ 120V (A) 1.27 1.13 1.00 0.83 0.75 0.66 0.63 0.57 0.27 0.27
Input Current @ 277V (A) 0.58 0.53 0.48 0.42 0.39 0.36 0.34 0.32 0.19 0.19
Input Current @ 347V (A) 0.45 0.40 0.36 0.30 0.27 0.24 0.23 0.21 0.10 0.10
Input Current @ 480V (A) 0.33 0.30 0.27 0.23 0.21 0.19 0.19 0.17 0.09 0.09
Distribution
T3
(Type III)
Lumens 20,089 18,434 16,810 14,515 13,360 12,083 11,550 10,705 4,901 4,901
BUG Rating
1
B3-U0-G3 B3-U0-G3 B3-U0-G3 B3-U0-G3 B3-U0-G3 B3-U0-G3 B3-U0-G3 B2-U0-G2 B1-U0-G1 B1-U0-G1
Lumens per Watt 132 136 140 146 149 153 154 156 167 167
T4
(Type IV)
Lumens 19,720 18,095 16,502 14,249 13,115 11,862 11,338 10,509 4,811 4,811
BUG Rating
1
B3-U0-G3 B3-U0-G3 B3-U0-G3 B3-U0-G3 B3-U0-G3 B2-U0-G3 B2-U0-G3 B2-U0-G3 B1-U0-G2 B1-U0-G2
Lumens per Watt 129 134 138 144 147 150 151 153 164 164
T5
(Type V)
Lumens 19,956 18,311 16,698 14,418 13,271 12,003 11,473 10,634 4,868 4,868
BUG Rating
1
B3-U0-G3 B4-U0-G2 B4-U0-G2 B3-U0-G2 B3-U0-G2 B3-U0-G2 B3-U0-G1 B3-U0-G1 B2-U0-G1 B2-U0-G1
Lumens per Watt 131 135 139 145 148 152 153 155 166 166
NOTES:
1. All BUG Ratings reported with xture oriented at 0 degrees.
Power and Lumens (LAS100)
Lumen Select Switch
Position 0
(Factory Preset)
1 2 3 4 5 6 7 8 9
Power (Watts) 251.0 222.2 196.4 162.8 146.8 129.9 123.4 112.9 48.0 48.0
Input Current @ 120V (A) 2.09 1.86 1.64 1.36 1.23 1.09 1.03 0.95 0.41 0.41
Input Current @ 277V (A) 0.90 0.82 0.73 0.62 0.57 0.52 0..50 0.46 0.28 0.28
Distribution
T3
(Type III)
Lumens 33,965 31,166 28,421 24,541 22,588 20,429 19,527 18,100 8,286 8,286
BUG Rating
1
B4-U0-G4 B4-U0-G4 B4-U0-G4 B3-U0-G3 B3-U0-G3 B3-U0-G3 B3-U0-G3 B3-U0-G3 B2-U0-G2 B2-U0-G2
Lumens per Watt 135 140 145 151 154 157 158 160 173 173
T4
(Type IV)
Lumens 33,342 30,594 27,900 24,090 22,174 20,055 19,169 17,768 8,134 8,134
BUG Rating
1
B4-U0-G4 B3-U0-G4 B3-U0-G4 B3-U0-G4 B3-U0-G3 B3-U0-G3 B3-U0-G3 B3-U0-G3 B2-U0-G2 B2-U0-G2
Lumens per Watt 133 138 142 148 151 154 155 157 169 169
T5
(Type V)
Lumens 33,740 30,959 28,232 24,378 22,438 20,294 19,398 17,980 8,231 8,231
BUG Rating
1
B5-U0-G3 B5-U0-G3 B4-U0-G2 B4-U0-G2 B4-U0-G2 B4-U0-G2 B4-U0-G2 B4-U0-G2 B3-U0-G1 B3-U0-G1
Lumens per Watt 134 139 144 150 153 156 157 159 171 171
NOTES:
1. All BUG Ratings reported with xture oriented at 0 degrees.
View LAS IES files
Dimming Occupancy Sensor (MS)
These sensors are factory installed in the luminaire housing. When a sensor for dimming
operation (/DIM) option is selected, the luminaire will dim down to approximately 50
percent power after ve minutes of no activity detected. When activity is detected,
the luminaire returns to full light output. These occupancy sensors include an
integral photocell that can be activated or inactivated with the programming remote
/ conguration tool for “dusk-to-dawn” control or “daylight harvesting”. Note: For MS
sensors, the factory preset is OFF (Disabled). The programming remote / tool is a
wireless tool that can be utilized to change the dimming level, time delay, sensitivity and
other parameters. The sensor lens optimizes the coverage pattern for mounting heights
from 20’-40’.
For mounting heights up to 20' (-L20)
20
15
10
5
0
20 18 15 12 9 6 63 9 12 15 183 0 20
Coverage Side Area (Feet)
0
12
8
36 7 0
Coverage Side Area (Feet)
For mounting heights up to 8' (-L08 - Cutoff 8' to 24')
7 361824 5 5 18 24
0
40
30
20
10
30
12
0
Coverage Side Area (Feet)
For mounting heights up to 40' (-L40)
12 30
20 6 6 20
0
40
27
15
50
30
0
Coverage Side Area (Feet)
For mounting heights up to 40' (-L40W)
30 50
40 1020 10 20 40
Control Options