Cut Sheet
NOTE: Specifications and dimensions subject to change without notice.
Visit our web site at www.cooperlighting.com
Customer First Center 1121 Highway 74 South Peachtree City, GA 30269 770.486.4800 FAX 770.486.4801
VOLTAGE CHART
120/208/240/277V (wired 277V)
120/277/347V (wired 347V)
120/208/240/277/480V (wired 277V)
MT= Multi-Tap
TT= Triple-Tap
5T= 5-Tap
8
Pulse Start Metal Halide (MP) 70, 100, 175, 200, 250, 320, 350, 400, 450W
Metal Halide (MH) 175, 250, 400W
High Pressure Sodium (HP) 70, 100, 150, 250, 400W
LAMP TYPE WATTAGE
Series
F=Enterprise
Lamp Type
S=High Pressure Sodium
M=Metal Halide
P=Pulse Start Metal Halide
Lamp Wattage
25=250W
32=320W
40=400W
35=350W
40Q=400W and Quartz Restrike
258=250W (Canada, Triple-Tap Ballast)
408=400W (Canada, Triple-Tap Ballast)
Stock Sample #: FS25-NL
NOTES:
Options not available with stock products.
Order Accessories as separate items for
field installation. Refer to standard ordering
information to add options and accessories.
F
STOCK SAMPLE NUMBER
ADH082409 pc
2010-11-09 10:26:09
EP
ENTERPRISE 22
2013-07-11 16:07:22
ORDERING INFORMATION
Sample Number: MPEP-R22-250-MT-Q
Voltage
4
120V
120V=
208V
208V=
240V
240V=
277V
277V=
347V
347V=
480V
480V=
MT
Multi-Tap,
wired 277V
5
=
TT
Triple-Tap,
wired 347V
6
=
5T
5-Tap
7
=
Lamp
Wattage
MP
100
100W=
175
175W=
250
250W=
320
320W=
400
400W
=
MH
2
175
175W
=
250
250W
=
400
400W
=
HP
100
100W
=
250
250W
=
400
400W
=
Accessories
14
C3
3' Cord-No Plug - Requires FH-1, FL-1, or
SHK
9
=
PC3
3' Cord with NEMA Plug - (120V-L5,
208V-L6-15P, 347V-L37-20P and
480V-L8-20P) Other cord lengths are
available by specifying length (PC6 for 6'
cord). Requires FH-1 or FL-1, or SHK. Use
with TPPH-NEMA. Specify Voltage.
9
=
PHC
Power Hook Cord and Non-NEMA plug
configuration. Must be used with FL-1 and
TPPH (Thru-Way Pendant Power Hook)
=
PHC-NEMA
Power Cord and NEMA plug - 18"
Power Cord and 20 Amp NEMA
plug configuration. Must be used
with FL-1 and TPPH-NEMA
(Thru-Way Pendant Power Hook)
=
WG22/EP
Wire Guard
=
MBT
Twin Mount Bracket (Fixtures must be same
voltage and without hooks, loops or plugs.)
=
TPPH
Thru-Way Pendant Power Hook. Requires
FL-1 and PHC. Specify Voltage.
=
TPPH-F
Thru-Way Pendant Power Hook Single
Fuse, 120, 277 or 347 Volt. Requires
FL-1 and PHC. Specify Voltage.
=
TPPH-F2
Thru-Way Pendant Power Hook -
Double Fused, 208, 240, or 480 Volt.
Requires FL-1 and PHC. Specify
Voltage.
=
TPPH-F-QD
Thru-Way Pendant Power Hook
Single Fuse, Quick Disconnect.
Requires FL-1 and PHC. Specify
Voltage (120, 277, or 347V)
=
TPPH-F2-QD
Thru-Way Pendant Power Hook
Double Fuse, Quick Disconnect.
Requires FL-1 and PHC. Specify
Voltage (208, 240, or 480V)
=
TPPH-NEMA
Thru-Way Pendant Power Hook.
Requires FL-1 and
PHC-XXXV-NEMA. (Specify
=
FH-1
Fixture Hook
=
FL-1
Fixture Loop
=
SHK
Hook with Safety Screw
=
TWMBS
Thru-Way Mounting Box
15
=
Options
C3
3' Cord with no plug (Specify Voltage)
9
=
PC3
3' Cord with NEMA Plug (120V-L5-15P,
208V-L6-15P, 347V-L37-20P, AND
480V-L8-20P) Other cord lengths are
available by specifying length (PC6 for 6'
Cord) Requires FH-1 or FL-1, or SHK.
Example: PC3-120V Use with
TPPH-NEMA. Specify Voltage.
9
=
PHC
Power Cord and Plug (18" Power Cord
and Non-NEMA plug configuration. Must
be used with FL-1 and TPPH (Thru-Way
Pendant Power Hook). Must specify
single voltage.
=
PHC-NEMA
Power Cord and NEMA Plug (18"
Power Cord and 20 AMP NEMA
plug configuration). Must be
used with FL-1 and TPPH-NEMA
(Thru-Way Pendant Power
Hook).
=
FH-1
Die-cast Aluminum Fixture Hook (with
3/4" threads for easy installation)
=
FL-1
Malleable Iron Plated Fixture Loop (with
3/4" threads for easy installation)
=
SHK
Die-cast Aluminum Fixture Hook (with
safety screw and 3/4" threads for easy
installation)
=
F1
Single Fuse (120, 277 or 347V only)
=
F2
Double Fuse (208, 240 or 480V only)=
SCF
3' Aircraft Safety Cable secures
Housing to Ceiling (Alternative lengths
available. Example: SCF6 = 6' Cable)
=
Q
Quartz Restrike (Hot Strike Only)=
EM
Quartz Restrike with ''Delay Relay'' (Quartz
lamp strikes at both hot and cold starts)
=
EM/SC
Emergency Separate Circuit
10
=
L/TCB
Less Top Connector Box (Housing
shipped less top connector box.
(Specify when using TWMBS
accessory)
=
LL
Lamp Included
11
=
CEC
California Title 20 Compliant Ballast
(Applies to 250-320W and 400-450W MP
only)
=
SCR
Aircraft Safety Cable-Housing to
Reflector
=
W/MWS
MWS Industrial components attached
to the fixture at the factory. (Standard
cord length is 3 ft. 6 ft. and 11 ft. also
available. Please refer to MWS
Modular Wiring System section for
additional information.
=
HC
LumaWatt Fixture Control Module
(Low voltage leads pulled out of top
connection box for areas requiring all
wiring to be installed in conduit)
12, 13
=
HL
LumaWatt Fixture Control Module
(Allows low voltage control wire to be
daisy-chained between fixtures outside
AC conduit run similar to low voltage
intercom's, fire alarms and phone
systems)
13
=
QLL
Quartz Lamp Included (Lamp is Cooper
designated product based on luminaire
requirements. Lamp is shipped separate
from luminaire unless otherewise noted)
=
FILT
Sintered Bronze filter (Sintered bronze
filter prevents the entrance of
contaminants)
=
Reflector
Diameter
R22
22'' Reflector
Diameter
=
Lamp Type
MP
Pulse Start Metal
Halide
1
=
MH
Metal Halide
1, 2
=
HP
High Pressure
Sodium
=
Reflector Type
__
Acrylic=
PL
Polycarbonate
3
=
Series
EP
Enterprise
=
Socket
OR
Open Rated
Socket for
Metal
Halide
Lamps
8
=
__
Non
Applicable
(HPS or Not
compatible
with OR
Socket)
=
1
Open Rated socket and lamp must be used.
Notes:
2
MH available in non-U.S. markets only.
3
Not recommended for use with Metal Halide lamps due to rapid yellowing typical of
polycarbonate material.
4
Products also available in non-US voltages and 50HZ for international markets. Consult your
Cooper Representative for availabiltiy and ordering information. 88% Efficient EISA Compliant
MP Fixtures not available in 347V and TT Voltages.
5
Multi-Tap ballast 120/208/240/277V wired 277V.
6
Triple-Tap ballast 120/277/347V wired 347V.
7
5-Tap ballast 120/208/240/277/480V wired 277V. 400W Metal Halide only. 88% efficient EISA
Compliant MP fixtures not available in 5-Tap Voltages.
8
Not applicable for HPS.
9
Requires FH-1or FL-1or SHK.
10
Not available with HL or HC options.
11
Lamp is shipped separately.
12
Not available with PC3, C3, PHC or MWS. Not available with single circuit MWS special order.
13
30 second time delay when switching from bright to dim. Consult individual lamp
manufacturers recommendations for compatible lamps. For use with CWA ballast only.
14
Order separately.
15
Specify L/TCB when using thru-way mounting box (TWMBS) accessory.