User's Manual

54 55

●

AUX Menu

* Select AUX output source

* PVW, PGM, CLEAN, MVW can be selected as AUX by pressing blue arrow

on the top right-hand corner

* CLEAN is the video without DSK(Fill, Key)

[ ] Go to next page

[ ] Go to previous page

* AUX output video source appears on PGM screen

●

[Resolution] Select system resolution

[Chroma, Luma] Select KEY type

[Auto time] Set the auto transition time

[0dB] Select to decrease the external audio levels

* 0dB : No audio decrement

* -10dB : Decreases -10dB relative to the actual audio input

[Button] Controls brightness of the console buttons

[Genlock] Select to use GEN LOCK function

* On : Use Ref In

* Off : Not use Ref In

Output Resolution

(System Resolution)

1280x720p50 576i50(PAL), 720p50, 1080p50, 1080i50

1280x720p59 480i59(NTSC), 720p59, 1080p59, 1080i59

1280x720p60 720p60, 1080p60, 1080i60

1920x1080i50 576i50(PAL), 1080i50

1920x1080i59 480i59(NTSC), 1080i59, 1080p29

1920x1080i60 1080p30, 1080i60

1920x1080p23 1080p23

1920x1080p24 1080p24

1920x1080p25 576i50(PAL), 1080i50, 1080p25

1920x1080p29 480i59(NTSC), 1080i59, 1080p29

1920x1080p30 1080i60, 1080p30

1920x1080p50 576i50(PAL), 720p50, 1080i50, 1080p50

1920x1080p59 480i59(NTSC), 720p59,1080i59, 1080p59

1920x1080p60 720p60, 1080i60, 1080p60

[LAN] Check IP information

[USB] Load and apply contents to VS10 generated through VS10 Utility software

[Input Res] Check each resolution of the inputs

[Tally] Select pin for Tally

[Audio Meter] Display on / off at Multiview.

[Help] Check minimum and maximum values of the joy stick and T-bar.

Check the temperature of VS10.

[Save] Save current settings

REF IN Resolution