User's Manual

ManualsBrandsLumantek ManualsProduction Switchersez-Pro VS10 3G-SDI/HDMI Video Switcher with 5" LED Touchscreen

52 53

Normal

●

LUMA Key Mode

Inverted

100%

16(64)

235(940)

Opaque

Minimum

Transparent

Minimum

Gain 100% = No semitransparent region

Gain 0%= Maximum semitransparent region

Gain 100%= No semitransparent region

●

KEYER MENU [Luma]

[Source]

Go to LUMA source selection menu

(PIP1, PIP2 also selectable as LUMA source)

[LUMA Invert, Trans,Saturation Min/Gain]

Inv : Set invert off/on

Transparency: Set transparency of the foreground at its minimum

Saturation Min: Set range of opacity of the foreground

Saturation Gain: Set area of translucency of the foreground

(100%: only black turns transparent, 0%: translucent maximum area)

* Use jog, +, -, or touch-screen to change values

●

Wipe Menu

* Select WIPE type used in WIPE1, WIPE2

* To select, use:

1. AUX button

2. Touch-screen

3. Rotate jog button to select and select by pressing

●

DSK Menu

[Fill Source] Select DSK Fill source

[Key Source] Select DSK Key source

* To select, use:

1. Touch-screen

2. Rotate jog button to select and select by pressing

●

Audio Menu

[Volume]

Control volume of 10 x input video sources, external audio and outgoing PGM

audio (control range is from -90dB to +12dB)

[Mute]

Select to mute the audio volume

1. On: Audio muted

2. Off: Audio unmuted. Volume levels set to user’s setting

[Audio Follow Video]

* On : Audio on only when input source is selected as PGM

* Off : Volume level set to user’s setting.

If MUTE is ON then no audio will be outgoing.

[Audio Mode]

* L|L : Use only left audio channel of selected sources.

* L|R : Use left and right audio channel of selected sources seperately.

* R|R : Use only right audio channel of selected sources.