Manual

VisionHDP™ User Manual and Installer Guide

colorbar pattern and the red filter. Finally set the green color (COLGRN) and Hue (HUEGRN)

offsets using the green colorbar pattern and the green filter.

MENU → IN → CONFIG → COLR → COLR →

(COLR, HUE, COLRED, HUERED, COLGRN, HUEGRN) → […, †, ˆ, ‡] OK

• Select Advanced AVIA → Video Test Patterns → Special Tests → Y/C-Delay.

• Set Y/C Delay. Use the Lumagen Control to minimize the error in the blue and red timing

verses Luma. On the right part of the screen there are red bars on a yellow background. Adjust

to balance any color transition errors on the left and right edges of the red bars. The C

and

channels are calibrated independently.

MENU → IN → CONFIG → ADJ → YC-DLY → (CBCR, CB, CR) → […, †, ˆ, ‡] OK

• Copy the DVD configuration to all configuration memories (MENU → IN → COPY → OK).

• If desired, change to MEMB and calibrate for a different amount of room light. Then switch

back to MEMA, and again copy the DVD configuration to all configuration memories.

• Calibrate the other inputs.

• Name the inputs, if desired (MENU → CONFIG → IN → NAME → OK and follow directions).

• Set power-on message, if desired (MENU → MISC → POWR → MSG → […, †, ˆ, ‡] OK)

• Lock the configuration, if desired (MENU → MISC → LOCK → LOCKED OK)

• SAVE THE CONFIGURATION (MENU → SAVE → SAVE OK)