Manual

Section 11 – Specifications
RadianceXS rev 091211
40
Section 11 – Specifications
Input
10 video inputs:
o 4 HDMI
®
1.4 “3D” (480i to 1080p60)
o 2 Component, SD/HD (480i to 1080i and PC up to 1280x1024 at 60 Hertz)
o 2 SVideo (480i, 576i)
o 2 Composite (480i, 576i)
11 audio inputs:
o 4 HDMI 1.4 “3D”
o 2 Analog Stereo
o 2 Digital Optical
o 3 Digital COAX
Automatic detection for NTSC, PAL and SECAM
Analog inputs support NTSC (M, Japan, 4.43), PAL (B, D, G, H, I, M, N, Nc)
and SECAM (B, D, G, K K1, L).
Analog audio and video inputs, absolute maximum rating is ±1 volts, referenced to case
Processing
10-bit processing front-end with 12-bit calibration pipeline
Proprietary Lumagen “No-ring” ™ scaling
Support for HDMI 1.4a “3D”
Each input has 4 user configuration memories, with 8 resolution sub-memories for each
2:2, 3:2 and 3:3 pull-down for SD/HD film sources
Per-pixel SD/HD video de-interlacing
Adaptive diagonal filtering
MPEG mosquito and block artifact reduction
Temporal noise reduction for SD/HD sources
User programmable non-linear-stretch (NLS) mode, 4:3 to 16:9 or 16:9/1.85 to 2.35
4:3, LBOX, 16:9, 1.85, 2.35 and NLS input aspect ratios
Programmable output aspect ratio from 1.33 to 2.50
Support for anamorphic lenses
Extensive suite of test patterns
Parametric grayscale calibration, 2,5,10,11 or 21 point
Parametric Gamma calibration, 2,5,10,11 or 21 point
Programmable input/output color-space
Y/C-delay calibration
User-adjustable image enhancement
CUE and ICP filtering
Supports HDCP
Output
2 HDMI 1.4 “3D”, 480p to 1080p and 1080i
Eight channel audio at 192 kHz
HDMI inputs and outputs support DD True-HD™, and DTS Master Audio™
Each HDMI output provides “stand-by” power to external device of +5V at 50 mA
1 Digital COAX audio
Miscellaneous
IR and RS232 control (See Tech Tip 11 and 12 on the www.lumagen.com website)
LVTTL IR format command input (See Tech Tip 9)
Universal Power Supply, INPUT: 100-240V at ~50/60Hz. OUTPUT: 5.0 VDC, 4.0A
Power consumption: 16 Watts
Optional rack mounting ears