Owner's manual
Table Of Contents
- LEGAL NOTICES:
- WARNINGS:
- Section 1 – Introduction
- Section 2 – Overview
- Section 3 – Quick Start Guide
- Section 4 – Basic Commands
- Section 5 – Video Configuration
- Section 6 – Audio Configuration
- Section 7 - Calibration
- Section 8 – Miscellaneous Commands
- Section 9 – 3D Support
- Section 10 – Darbee Visual Presence™
- Section 11 – Command Interface
- Section 12 – Specifications
Section 12 – Specifications
Copyright 2009-2014 Lumagen, Inc. Radiance 2123 and 2143, Rev 041614
35
Section 12 – Specifications
Inputs
• 8 HDMI
®
1.4a with 3D at up to 1080p60
Processing
• Proprietary Lumagen No-Ring™ scaling
• Darbee Digital Visual Presence™ (DVP™) enhancement technology
• 10-bit processing for deinterlacing plus a 12-bit calibration pipeline
• Support for HDMI
®
1.4 “3D” including anamorphic lens scaling
• Convert common optional 3D formats to a required format support by the display
• Each input has 4 user configuration memories
• Each input user configuration memory has 8 resolution sub-memories (for HD inputs)
• Each resolution sub-memory is linked to one of 8 output configurations.
• 2:2, 3:2 and 3:3 pull-down for SD/HD film sources
• Per-pixel SD/HD video de-interlacing
• Adaptive diagonal filtering
• MPEG mosquito and block artifact reduction
• Temporal noise reduction for SD and HD sources
• User programmable non-linear-stretch (NLS) mode
• 4:3, LBOX, 16:9, 1.85, 2.35 and NLS input aspect ratios
• Programmable output aspect ratio from 1.10 to 2.50
• Extensive support for anamorphic lenses for both 2D and 3D video
• Large suite of test patterns
• Full CMS (Color Management System) using a 729-point 3D linear-gamma RGB color palette
• 21-point parametric grayscale and Gamma calibration
• Programmable input/output color-space
• Y/C-delay calibration
• CUE and ICP filtering
Outputs
• Output resolution from 480p to 1080p60 (2123) or up to 4k60 8-bit 4:2:0 for 2143, plus 1080i
• 2 HDMI 1.4a, with 3D
• Eight channel audio at 192 kHz
• Supports DD True-HD™, and DTS Master Audio™ bitstream formats
• Each HDMI output can provide “stand-by” power to an external device of +5V at 50 mA total including
the display and any devices that harvest power from the HDMI connection.
Miscellaneous
• IR and RS232 control (See Tech Tip 11 and 12 on the www.lumagen.com website)
• Wired IR format command input
• Universal, 100-240V, ~50/60Hz external 12 VDC power supply
• Power consumption: 25 Watts including external power supply
• Optional rack mounting ears