Instruction Manual

Section 12 – Specifications

Radiance 2020 rev 102214

Section 12 – Specifications

Inputs

• 4 HDMI

1.4a with 3D at up to 1080p60

Processing

• Proprietary Lumagen No-Ring™ scaling

• Darbee Digital Visual Presence™ (DVP™) enhancement technology

• 10-bit processing for deinterlacing plus a 12-bit calibration pipeline

• Support for HDMI

1.4 “3D” including anamorphic lens scaling

• Convert common optional 3D formats to a required format support by the display

• Each input has 4 user configuration memories

• Each input user configuration memory has 8 resolution sub-memories (for HD inputs)

• Each resolution sub-memory is linked to one of 8 output configurations.

• 2:2, 3:2 and 3:3 pull-down for SD/HD film sources

• Per-pixel SD/HD video de-interlacing

• Adaptive diagonal filtering

• MPEG mosquito and block artifact reduction

• Temporal noise reduction for SD and HD sources

• Output resolution up to 1080p60

• User programmable non-linear-stretch (NLS) mode

• 4:3, LBOX, 16:9, 1.85, 2.35, 2.40 and NLS input aspect ratios

• Programmable output aspect ratio from 1.10 to 2.50

• Extensive support for anamorphic lenses for both 2D and 3D video

• Large suite of test patterns

• Parametric grayscale and Gamma calibration

• Full CMS (Color Management System) using a 729-point 3D linear-gamma RGB color palette

• 21-point parameter grayscale and Gamma

• Programmable input/output color-space

• Y/C-delay calibration

• CUE and ICP filtering

Outputs

• 2 HDMI 1.4a, with 3D

• Maximum output rate of 1080p60

• Eight channel audio at 192 kHz

• Supports DD True-HD™, and DTS Master Audio™ bitstream formats

• Each HDMI output can provide “stand-by” power to external device of +5V at 50 mA

Miscellaneous

• IR and RS232 control (See Tech Tip 11 and 12 on the www.lumagen.com website)

• Wired IR format command input

• Universal, 100-240V, ~50/60Hz external 12 VDC power supply

• Power consumption: 25 Watts including external power supply