Owner’s Manual MF26B 26” Commercial Misting Fan IMPORTANT SAFETY INFORMATION: Please carefully read this manual before attempting to install or use this misting fan. For your safety, comply with all safety instructions and warnings contained in this owner’s manual to prevent personal injury or property damage. To view the full line of Luma Comfort products, please visit www.lumacomfort.com.
Contents Introduction ..................................................................................................................... 1 Product Benefits .............................................................................................................. 1 Important Safety Information ........................................................................................... 1 Assembly Instructions ...............................................................................................
Introduction Thank you for purchasing this misting fan from Luma Comfort, the world leader in home appliances and home comfort products. This owner’s manual provides specific operating instructions for your misting fan. Use the misting fan only as instructed in this owner’s manual.
Assembly Instructions DO NOT plug in the fan before assembly. This misting fan comes in 3 separate boxes. Carefully remove all packaging materials and retain for future storage/use. Make sure there is no residual foam left in any of the components. A screwdriver and wrench will be required to assemble this misting fan. Step 1: Removing the Water Tank Refer to diagram 1. Carefully remove the water tank from the tank cart.
Step 2: Installing the Water Pump a. Refer to diagram 2. Remove the water pump from the packaging, making sure not to pull it out by the power cord. The water pump will be attached to a metal panel. b. Position the water pump in an upright position and place it on the plastic beam located at the bottom of the water tank. A small portion of the power cord will be submerged in the tank, but most of it should be placed outside the water tank.
Step 3: Assembling the Stand Pole a. Refer to diagram 3. Locate the tank cart and stand pole. Remove the four M8x20 bolts, spring washers, flat washers and nuts from the tank cart. b. Position the stand pole on the tank cart and align the holes on the pole with the four holes on the cart. c. Using the bolts, washers and nuts removed in step a, screw the stand pole into the tank cart. Make sure the stand pole is securely screwed onto the tank cart before proceeding to the next step.
Step 4: Assembling the Fan Head a. Refer to diagram 4. Remove the fan head from box #1. b. Align the stand pole opening on the bottom of the fan head with the stand pole and connect the two pieces together. c. Use the screw located on the screw attachment to secure the two pieces together.
Step 5: Connecting the Power Supply & Water Hoses a. Refer to diagrams 5 and 6. Insert the power line that is connected to the fan head into the power line opening and screw in the front panel to the stand pole. b. Insert the water output hose (hose #1) and water input hose (hose #2) into the appropriate connectors on the stand pole as indicated in diagram 6.
Step 6: Connecting the Power Supply (Upper Back Panel) a. Refer to diagram 7. Remove the upper back panel from the top of the stand pole by unscrewing the 4 M5 screws holding it in place. b. Insert plug A into socket A and make sure the connection is secure. c. Insert plug B into socket B and make sure the connection is secure. d. Push all of the wires back into the stand pole and reattach the upper back panel onto the stand pole using the 4 M5 screws removed in step a.
Step 7: Connecting the Power Supply (Lower Back Panel) a. Refer to diagram 8. Place the water tank on the tank shelf. e. Take the lower back panel that is attached to the pump and locate plug C and socket C. Insert plug C into socket C and make sure the connection is secure. f. Remove the 4 M5 screws from the stand pole and screw the lower back panel onto the stand pole.
Step 8: Connecting the Pump & Water Output Hoses a. Refer to diagram 9. Remove the tank cover from the water tank. b. Locate the pump hose (longer hose), the water output hose (shorter hose) and the pump power cord. c. On the bottom of the stand pole, there are 2 connections – one for the water output hose and one for the pump hose. Securely connect the hoses to the appropriate connections. d. Place the tank cover back onto the water tank.
Step 9: Locking/Unlocking the Handles This misting fan is equipped with handles for convenient transport. The handles will be in the locked position when first assembled. Follow these steps to unlock and lock the handles. a. Refer to diagram 10. To unlock the handles, push the L type pin on the handle joint. While pushing in the L type pin, simultaneously push the handle up. b. To lock the handles, push in the L type pin on the handle joint and simultaneously push the handle down to the lock position.
Operating Instructions 1. This misting fan can operate with optimal output in temperatures up to 104°F. 2. Lift up the tank cover and fill the tank with clean water. Make sure the pump hose is fully submersed in water. Replace the tank cover. 3. Connect the fan to a power supply. 4. Turn on the fan by adjusting the power switch to the ON position. 5. This misting fan has 3 different fan speeds. Turn the fan speed dial to adjust the fan speed. 6.
Maintenance Regular cleaning and maintenance is an essential step in maintaining the longevity of your misting fan and ensuring that it operates free of defects. Maintain your misting fan by following these steps: Always unplug the misting fan from the power supply before servicing or cleaning. Use a soft cloth and a mild soap and warm water solution to clean the fan’s exterior. Do not use harsh cleaners, gasoline, paint thinner, benzene, etc., as these substances can damage the misting fan.
Warranty Luma Comfort products are warranted to be free from defects in workmanship or materials for one (1) year from the date of purchase. If the product is found to be defective within this period, Luma Comfort, at its sole option, will repair or replace any components that fail during normal operation. The repairs or replacement will be made at no charge to the customer for parts and labor, assuming that the customer shall be responsible for all transportation costs to and from Luma Comfort.
