Quick Start Guide
30 | LulzBot TAZ Pro S
Before starting a print, check that your printer is ready. The hot end is still hot, use caution:
• Conrm that all packaging has been removed from your LulzBot TAZ Pro S
• Verify that the 3D printer is in a well-ventilated area, on a at and level surface, and has 30cm (12in)
clearance in all directions.
!
6.1 Your 3D printer is now ready to print! Click on the Monitor button at the top of the main Cura interface.
This will change the sidebar on the right side of the screen to show printer information and controls.