Manual

Section 3 - Controls and Indicators

3-2 31200354

3.2 CONTROLS

1. Accelerator Pedal: Pressing down the pedal increases engine and hydraulic

speed.

2. Ignition Switch

: Key activated. See page 3-8.

3. Service Brake Pedal

: The further the pedal is depressed, the slower the travel

speed.

With service brake pedal depressed and boom angles above 40°, the locked

mode of the Stabil-Trak system is activated. See page 3-19.

4. Transmission Control Lever

: See page 3-10.

5. Dash Panel

: See page 3-6.

6. Instrument Panel

: See page 3-4.

7. Steering Wheel

: Turning the steering wheel to the left or right steers the

machine in the corresponding direction. Three steering modes are available.

See “Steer Modes” on page 3-18.

8. Frame Level Indicator

: Enables operator to determine the left to right level

condition of the telehandler.

9. Horn

: Depress button to sound horn.

10. Accessory Control Lever

(if equipped): See page 3-17.

OU1911

SINGLE JOYSTICK

CONFIGURATION