Owner's manual

Model 644E Rev. 8/03

Operation

Fuel Cap

The fuel cap (1) is conveniently located on the left side of the vehicle.

The fuel cap meets EPA standards and a fuel cap key (2) must be used to unlock (3)

and lock (4) the fuel cap.

To unlock and remove the fuel cap:

1. Level the vehicle, ground the attachment, place the travel select lever in the

(N) NEUTRAL DETENT position, engage the parking brake switch and turn

the ignition switch to the OFF position. Remove the keys from the ignition.

2. Insert the fuel cap key (included with the ignition keys) into the fuel cap.

3. Turn the key 1/4 turn clockwise. To unlock the fuel cap. Do Not remove the

key.

4. Slowly unscrew the cap and wait for any “hissing” noise to stop. THEN

unscrew the cap all the way and remove the cap from the filler neck.

To lock the fuel cap:

1. Turn the cap clockwise until tight. The fuel cap is now properly tightened.

2. Turn the key 1/4 turn counterclockwise to lock the fuel cap in place.

Remove the key. The key can be turned to the lock position and removed

from the cap before the cap is installed onto the fuel tank. The cap will be

locked in position.

WARNING: REMOVE FUEL CAP SLOWLY. Fuel spray may

cause personal injury. Fuel can spray out on you if you open the cap

too quickly or if you fill the tank too rapidly.

OU0480