Owner's manual

General Maintenance

117

Model 644E Rev. 8/03

10. Turn the oil drain petcock lever (2) clockwise and lock into the CLOSED

position or install the drain plug (3) into the oil pan and tighten securely.

The petcock lever is spring loaded and will lock in the CLOSED position.

11. Remove the engine oil fill cap (4) and add 15W40 motor oil. (Refer to

engine manufacturers manual for recommended oil type for various condi-

tions.) Engine oil capacity with filter change is 10.5 quarts (10 liters).

12. Reinstall oil fill cap (4). Start engine and allow to run for several minutes.

13. Shut off engine. Wait several minutes and check the oil level on the dipstick

(5). Add oil if necessary. DO NOT overfill.

14. Look for oil leaks at the filter and drain. Tighten if necessary.

OU03022

OU0690