User Manual

SAFETY
7
Additional Safety Instructions:
•
Maneuver the machine carefully. Do not cause the
load to shift or the machine to tip.
•
Slow down for wet and slippery surfaces and
changes in terrain.
•
Turn the steering wheel smoothly and slow down
when turning.
•
Do not make sharp turns at high speeds.
•
Take special care when traveling without a load.
The machine is more susceptible to tipping over on
its side.
•
Do not continue to operate the machine if an
unsafe condition is found. Stop the machine and
report the condition to the designated authority.
•
Never make repairs or adjustments unless you are
authorized to do so.
•
Always keep your hands and feet inside the cab,
especially when in or around structures.
•
Never reach into the boom or attachments.
•
Understand the limitations of the machine and
drive safely.
•
Watch for pedestrians, especially when backing up
or turning and where pedestrians may step into the
path of the machine.
•
The machine may add to the overall sound level of
the work area. Give consideration to the sound
exposure of those working around you.
•
If a fuel leak is found, do not operate the machine
until the problem is fixed.
•
When approaching areas where vision is
obstructed, always slow down and sound the horn.
•
Report all accidents involving personnel, building
structures, and equipment to your supervisor or as
directed.
•
Use caution when operating on ramps, platforms,
trenches, and other similar surfaces.
•
Keep a clear view of the terrain and where the
machine is heading. Watch out for other vehicles,
people, and structures.
•
If the load blocks your forward view, then carefully
travel in reverse and use a signalman to guide you
if necessary.
•
Do not block access to fire lanes or fire equipment.