Service Manual User guide

Boom and Transfer

6-122

31200079

Fig. 6-125: Boom Elevation Proximity Switch Wiring

6. (Ref. Fig. 6-125) Remove boom elevation proximity switch as follows:

a. Disconnect connection wire from boom proximity switch.

b. Disconnect connection wire from wiring harness.

c. Remove all wire ties that secure the wiring harness to hydraulic

tubes and hoses so that it is completely separated from the transfer

carriage.

Fig. 6-126: Boom Cover Installation

7. (Ref. Fig. 6-126) Remove the boom cover on models with 3-section

booms (see Step a) or 4-section booms (see Step b).

a. Remove four (4) each nuts (Item 3), lockwashers (Item 1), and

flatwashers (Item 2) securing boom cover (Item 4) to boom.

Remove boom cover.

J1149

Wiring Harness

Connection

Proximity

Switch

Wire

J1169

3-Section Boom 4-Section Boom

# Description

1 Lockwasher

2 Flatwasher

# Description

3Nut

4Boom Cover