Service Manual User guide

Boom and Transfer
6-76 31200079
Fig. 6-81: Hose and Tube Removal – Inner Boom Section
30. (Ref. Fig. 6-81) Remove tubes and hoses from inner boom section as
follows:
a. Remove lock nuts from cushion clamps (Item 3) securing auxiliary
and carriage tilt hydraulic tubes (Items 4 and 5) in mounting
channels (Item 6).
b. Slide cushion clamps from mounting channel and remove hydraulic
tubes from inner boom section.
c. Remove hydraulic hoses (Items 1 and 2) from tubes.
J1246
3
4
5
6
1
2
# Description
1 Auxiliary Hydraulic Hoses
2 Carriage Tilt Hydraulic Hoses
3 Cushion Clamp
# Description
4 Auxiliary Hydraulic Tubes
5 Carriage Tilt Hydraulic Tubes
6 Mounting Channel