Service Manual User guide

Boom and Transfer
6-44 31200079
Removal
Quick Attach
1. Disconnect attachment from quick attach.
2. Fully retract boom and transfer carriage (if equipped), level quick
attach and lower boom to ground.
3. Set park brake, lock shift selector in NEUTRAL position, shut off
engine and remove ignition key from switch. Block all wheels.
Fig. 6-40: Lower Pivot of Carriage Tilt Cylinder
4. (Ref. Fig. 6-40) Remove capscrew (Item 3), lockwasher (Item 4), and
lock pin (Item 5) from lower pivot pin (Item 2) of front carriage tilt
cylinder (Item 6). Remove pivot pin from quick attach (Item 1).
J1067
6
5
4
3
2
1
# Description
1 Quick Attach
2Pivot Pin
3 capscrew
# Description
4 Lockwasher
5Lock Pin
6 Front Carriage Tilt Cylinder