Service Manual User guide

Boom and Transfer

31200079

6-3

Removal

Joystick

Fig. 6-3: Joystick Installation

(Ref. Fig. 6-3) The following steps are required to remove the joystick.

1. Follow preparation procedures as outlined in Section 3 of this manual.

2. Remove two (2) capscrews (Item 14) and lockwashers (Item 15)

securing side panel (Item 13) to control panel (Item 8). Remove side

panel.

J1120

# Description

1 Button Head Socket Capscrew

2 Lockwasher with Internal Teeth

3 Phillips Truss Head Screw

4 Flatwasher

5 Wiring Harness

6 Lead Connector

7Joystick

8 Control Panel

# Description

9 Connector

10 Connector

11 Swivel Tee

12 Hydraulic Hose

13 Side Panel

14 Capscrew

15 Lockwasher