Manual

NOTE:

Non-observance of the maintenance plan can lead to malfunctions that are not

covered by the warranty.

For removing the sparking plug, use a commercially-available sparking plug

spanner with universal joint and wrench size 16 mm (5/8 inch).

A straight/rigid sparking plug spanner would damage or break off the sparking

plug!

(also observe the separate instructions from the engine manufacturer)

First month or after the ﬁ rst 20 hours (ﬁ rst time):

• Change engine oil (see operating instructions of the engine manufacturer).

You must conduct the following service measures every 50 operating hours:

• Clean the air ¿ lter element.

• After using in a dusty environment, inspect the air ¿ lter element and clean immediately,

if necessary.

You must conduct the following service measures every 100 operating hours:

• Change engine oil.

• Check the sparking plug, clean if necessary / set the electrode gap of the sparking plug

You must conduct the following service measures every 200 operating hours:

• Replace the sparking plug

• Replace air ¿ lter

(The following service work should be executed by an authorised dealer, LUKAS directly or

the engine manufacturer.)

You must conduct the following service measures every 300 operating hours:

• Replace the sparking plug and ¿ lter element

• Clean and set the carburettor, valve clearance, valve seat and cylinder head.

You must conduct the following service measures every 1000 operating hours or every

2 years:

• Check the starter

• Inspect the engine for damage

• Check the fuel line and replace, if necessary.

11.3 Additional service work