Manual

25
All damaged and/or illegible labels (safety instructions, type plate, etc.) must be renewed.
Procedure:
1. Remove damaged and/or illegible labels.
2. Clean surfaces with industrial alcohol.
3. Affi x new labels.
Take care to affi x the labels in the correct positions. If you are no longer sure about this, then
please contact your authorised LUKAS dealer or LUKAS itself.
10.4 Checking the fi lters
The air inlet fi lter should be checked at least once a year. The fi lter can be checked from the
outside if the mains unit (or battery) is removed (see illustrations below).
If the fi lter is severely contaminated, it will need to be replaced. At the same time, the fi lters
in the air exhaust must be replaced. To do this, the housing must be opened up by trained
personnel and the fi lter replaced (see also spare parts list).
Procedure:
1. Tilt the P600OE as shown in the illustrations.
2. Check the status of the fi lter.
10.5 Changing the labels