Manual

23
10.3 Changing the hydraulic fl uid
After approx. 200 deployments, but after three years at the latest, replace the hydraulic fl uid.
The fl uid should be replaced when it is warmed up. When replacing the hydraulic fl uid, the
pump must be deactivated and the battery or the mains unit must be removed from the
connection slot.
The old hydraulic fl uid must be disposed of properly.
Procedure:
1. Open the fi ller cover. Removal of the fi ller cover will make the subsequent tasks easier.
2. Remove the fi ller cap on the fl uid tank.
1. 2.