Manual

Inspections to be carried out:

Visual inspection

• No visible damage to the housing,

• General tightness (leaks),

• ON/OFF switch in proper working order, undamaged

• Couplings must be easy to couple,

• Dust protection caps must be present

• Labels completely existent and legibly,

• Illumination of main switch, work area and tank illumination fully functional.

Battery and power supply

• Casing undamaged,

• Electrical contact surfaces clean and undamaged

• Cable undamaged

• Battery(-ies) fully charged (when used)

• Charging state display of lithium/ion battery(-ies) fully functional

Functional check

• no suspicious noises,

• tests at maximum load. When the maximum pressure is achieved, the pump switches

to the ECO mode after a short time. As soon as the pressure drops slightly, the pump

automatically switches back to the working mode.

(Recommendation: use the LUKAS test kit, including testing instructions, for the func-

tion test).

If the noises and suspicions referred to above arise several times in a month, or if maximum

pressure cannot be achieved during the function test, you need to contact LUKAS customer

service immediately. The contact details are given in the Chapter "Fault analysis".