Instruction Manual

10
2-way-distribution
valve N2W
841489903 2,1 Distribution valve to divide
one oil ow into two ows.
By closing or opening the
valve screw, the partial
ows could be regulated
and harmonized.
(Base plate is a basic
requirement)
Oil distributor with
pressure gauge
connection N4M
841489905 1,4 By use of the oil distributor
one oil ow can be divided
into 5 ows. The distributor
has 4 pressure ports
(G1/4”) and one pressure
gauge port (G1/4”).
(Base plate is a basic
requirement)
Mounting of base plates and valve blocks6.
ATTENTION!
When mounting base plates and valve blocks, hydraulic uid can leak from
the pump. To make sure that the quantity of the leaking uid is as small as
possible, the hand pump should be in a vertical position with the hydraulic
ports facing upwards, while mounting base plates and valve blocks
Make sure to store all plugs, screw plugs and/or dust caps in a way that
prevents them from getting dirty or lost.
Especially you will have to take care that the eventually leaking hydraulic uid
is being collected completely and being disposed professionally!