User's Manual

uBoard Hardware Installation Guide (V2.2)
PenAndFree Co.,Ltd, 2010 5
NOTICE:
.
Notice
1
Avoid using this device in the environment that air is blown directly to receiver from air
conditioner or heater.
2
Place Station in the middle of whiteboard or working area in the left side if possible,
and make sure station position with screen without tilting vertically
3
Position station to keep 2 cm at the least away from left vertical line of projected
screen
4
Recommend to use USB repeater in case that USB extension cable is exceeding
10m.
3. Digital pen
Digital pen for uBoard is ideally designed to support upto120 inches as effective working
area. It adopted many key features to maximize user convenience.
3.1 Key features
3.1.1 Button functions
uBoard digital pen has 2 buttons executing different functions depending working
environment.
a. In MINT Interactive mode (Board software).
- Low button (close to pen tip): executes the right button of mouse.
- Upper button: switching eraser mode to writing mode or vice versa.
b. In Window mode.
- Low button: executes the right button of mouse.
- Upper button: executes window Exit when to push it during a couple of seconds.
(This function is only available during MINT control is active.)