User's Manual
uBoard Installation Guide (V4.1)
9 |
P a g e
① To remove: Turn the pen-tip to right or left direction by 90 degrees with pulling
it out carefully.
② To insert:
Insert the pen-tip into pen cage and turn it to right or left direction by
90 degrees to lock it.
Notice:
Do not expose to heat(130F), imapct, chops or etc
Careful of inhaled or bited case by children or pets
Prohibit inserting metals to the charging hole or sink in water.
1.4. Check Environment.
Please avoid the following environment when to use uBoard system.
① Avoid using uBoard in the environment that air is blown directly to uBoard
station from air conditioner or heater.
② Avoid using uBoard at the place using vacuum cleaner or some other
machines causing metallic sound. It may sometimes cause malfunction
temporary.
③ uBoard is also using Infrared rays internally for reference signal. Therefore, it
may be sometimes affected by IR emitted from other devices. Thus, disabling
IR function on other infrared devices around uBoard is highly recommended
④ [For wired model] Recommend to use USB repeater in case that USB
extension cable is longer than 10m.
⑤
[ For wireless model ] In order to use Bluetooth wireless in a safe way, please
use it within 10m distance between the uBoard station and the computer
.