User's Manual

uBoard Installation Guide (V4.1)
8 |
P a g e
1.3.4 How to check the pen status.
In order to check whether the digital pen is working properly, press pen tip or pen
button. Then you can hear low beep sound generated by the pen when it works
properly. The digital pen adopted auto power saving algorithm. So it will
automatically enter to the hibernation mode to save power when the pen is idle for
10 seconds. In order to wake the pen in the hibernation mode, please touch the
pentip or click any button on it. Then the pen will be awakened immediately.
1.3.5 Pen tip change
When pen tip is worn-out, it can be replaced with new one. Please refer to the
following steps to replace it properly.
10 sec