User's Manual

uBoard Installation Guide (V4.1)
6 |
P a g e
The function of front touch panel is as follows.
Note:
 Do not block receiver holes located on the right side of the station.
 All function keys on the uBoard station except ‘Calibrate’ can be workable in only
annotation SW mode (later, you will see the name of annotation SW is MINT
Interactive.) (see 1.3.2)
[For wireless model]
When the battery recharging level is below 20%, ‘connect status indicator’ lamp
starts to blink fast. Then please charge the station by connecting the station and
the computer with USB cable or USB charger immediately.
However, when the ‘connect status indicator’ lamp blinks slowly, it means uBoard
station is trying to establish pairing between the station and the active-link on the
computer.
1.3. Understanding the digital pen operation.
1.3.1 General description.
The digital pen is transmitting signal to the station for tracing pen position on the
workspace. As transmitting signal requires external power, uBoard digital pen adopts
rechargeable battery for it. Rechargeable battery provides great benefits to avoid
environment contamination as well as maximizes user convenience. And you can
use the laser pointer which can be attached to the digital pen for efficient
presentation. As the laser pointer shares the power of the digital pen, do not use it
excessively to save the power.
Laser pointer
Upper button
Lower button
Pentip
Calibration
All erase current
workspace
Invoking web
Browser
Save Current
workspace
Print current
workspace
Power button
Power indicator
Connect status Indicator
(Wireless model only)
Receiver sensor
Mini USB port
Laser pointer
button