User's Manual

uBoard Installation Guide (V4.1)
30 |
P a g e
① When the shell file is executed successfully, ‘MINT Control’ and ‘MINT Interactive’
will be appeared in the PenAndFree of Applications folder as follows.
② Also, if you see the icon as below, this is completed the install.
4.4 .Option for uBoard Setup
After finishing SW installation, Calibration step is required to define working space
before using uBoard. This step is not necessary repetitively whenever to use uBoard
after the 1
st
calibration. But when the position of the beam projector or the projected
screen size is changed, calibration is always required. We recommend the user to
execute this calibration periodically to make it accurate
When cursor position needs to be realigned to keep accurate, this step is also
necessary.
4.4.1 Preparation.
Check whether uBoard is configured properly on your computer. The way to check
its availability is as follows.
 Execute ‘MINT Control’
 Find ‘Information’ Tab.
 Find ‘connected device’ on it.
When the device name is displayed, it means the device is configured
properly.
Note: