User's Manual

(3) < Install on laptop screen >

• Take off the masking tape on the back side of deco fixture. Attach deco fixture on top, right or left side of laptop cover.

※ please confirm station position setting in option menu of driver software (MINT Control).

(4) < Connect USB >

• Plug USB connector to USB port of PC.

• When PC is on after installation, blue light will show on station and PC will automatically recognize device.

(5) < Store separated from computer >

Keep separate from PC when not being used. When being used, you can attach station to deco fixture. You can keep station

attached for a while after use.