Item Brochure

Lufkin

3 403 50 3 20 3 10 3 00 2 90 2 80 2 70 2 60 2 8

3 30

D6 Chrome Clad

• 1/2”/13mm width

• Chrome Clad

blade

• Black and red markings on metric side

• Metric - graduated meters to millimeters; numbered

right to left in meters and millimeters

• English side - graduated feet and inches to 1/8ths;

numbered right to left

45 046 0 44 0 43 0 42 0 41 0 40 0

39 0 38 0 37 0 36 0

D7 Nubian

• 1/2” width only

• Nubian

blade

• Graduated in meters; numbered in millimeters

How to Measure an Inage Plumb Bob

Tapes cut and fitted with the swivel snap to be used with the 588 and 590 plumb-bobs are

known as inage gauging tapes. When the plumb bobs are assembled to the swivel snap

the zero point is at the bottom of the plumb bob. When being used, the plumb bob and

tape are lowered until the bob contacts the bottom of the tank. When the tape is reeled in,

the liquid line is read on the tape line itself, thereby showing you the contents of the tank.

It takes more than a quality gauging tape, it takes a smart user. Every time you use a

Lufkin oil gauging tape, follow proper grounding techniques. Ground your body. Ground

your gear. And always use a grounding strap. Lufkin oil gauging tapes come complete

with a grounding strap and an ESD handle, and are in full compliance with all current and

proposed American Petroleum Institute standards. Achieve a solid ground every time. Use

Lufkin oil gauging tapes, and follow proper grounding procedures.

D5 Nubian

2345 1

• 1/2” width only

• Nubian

blade

• Markings one side only

• Graduated feet and inches to 1/8ths; instantaneous

foot readings

Oil Gauging

OIL GAUGING BLADES & PLUMB BOBS