User manual

EN Operating manual – temperature measuring device XP100 / XP101 7
11_2014
Archive screen
In the Archive screen, you can view archived measuring projects
or open them for further processing:
Archive, fig. A.:
The icons beside the saved measuring projects show each
measuring mode (see examples in fig. A.). The meaning is as
follows:
Archive, fig. B.:
20 Shows the measuring projects which are saved in the archive.
The currently selected archive entry is highlighted.
Navigate in the archive as follows:
1. Press the Down key on the cross control until the desired archive
entry is selected.
2. You may need to turn the page by pressing the Left or Right keys on
the cross control.
3. Press the OK button on the cross control to confirm the selected
archive entry. You can also press OK (21) on the screen. Fig. B.
opens.
21 Selects the currently selected archive entry. => Fig. B. opens.
22 Deletes all entries from the archive. A safety prompt opens. Confirm
it by pressing the OK button if you want to delete all entries. Otherwise,
touch the Cancel button.
Spot measurement
Time measurement
23 Opens the selected archive entry (see fig. C.).
24 Deletes the selected archive entry. A safety prompt opens. Confirm it
by pressing the OK button if you want to delete the entry.
Otherwise, touch the Cancel button.
25 Closes fig. B. and returns to fig. A.