User manual

2 Operating manual – temperature measuring device XP100 / XP101 EN

11_2014

Description of the device

The temperature measuring device XP100 / XP101 is used for

carrying out accurate measured value detection. To do so, you

can connect different temperature probes of type PT1000 to the

device interface.

The operating elements are found on the front and sides of the

robust housing. A scratch-proof colour display with touch

function (1) allows entering and selecting values and functions

and also displaying detected results. You can also navigate the

device software by using the cross control (3) and the OK

button (5) and select measuring functions.

By pressing the Back key (2) you return to the previous screen of

the device software. Pressing the Menu key (6) directly opens the

main menu.

Pressing the Illumination key (4) either switches the background

illumination for the colour display and the keys on or dims them.

Located above the colour display (1) is the connection for the

digital sensors (7). Here you can connect the sensor. The

measured results of the connected sensor are shown in the

device's colour display (1).

The On/Off key (9) and a USB connection (10) are found on the

sides of the device.

You can connect the device to a computer by using the supplied

USB connection cable. Then you can extract and analyse your

measured results with the SmartGraph3 software.

Device depiction

Information about the device

No. Operating element

1 Scratch-proof colour display with touch function

2 Back key

3 Cross control with Up, Down, Left, Right keys

4 Illumination key

5 OK button

6 Menu key

7 Connection for PT100 sensors (4-pin)

8 Battery compartment with battery cover

9 On/Off key

10 Micro USB connection

910