Operating Instructions
Table Of Contents
- 1 Supply
- 2 Safety
- 3 Product
- 4 Charging process
- 5 Operation
- 6 Disposal and recycling
- 7 Maintenance/problem treatment
- 8 Technical data
- 9 Warranty
- 10 Standards/regulations
Maintenance/problem treatment
7 - 4
LUDWIG HOOK / 06/10/2020 / Ludwig System GmbH & Co KG; 83435 Bad Reichenhall, Germany / Tel.: +49 8651 7656730
7.3 Maintenance/checking
7.3.1 Frequent inspection
7.3.2 Annual maintenance
Maintenance and repair must be carried out 1x per year exclusively by the
manufacturer or an authorized service partner.
• Function check (and testing the carrying elements)
• Maintenance
• Repair
• Premature replacement of wear parts (e.g. actuator, locking pin, axle,
batteries)
7.3.3 Test
HINWEIS
m
HINWEIS
m
HINWEIS
m
NOTICE
Monthly inspection.
Visual examinations by a designated person of the custom-
er should be conducted at least monthly, based on mainte-
nance program at paragraph 7.1!
HINWEIS
m
HINWEIS
m
HINWEIS
m
NOTICE
Yearly maintenance.
The manufacturer will provide information about an upcom-
ing annual maintenance!
WARNING
m
Test.
The annual maintenance does not replace the country-
specific regulations concerning regular testing of load
slinging equipment.
The user is obligated to obtain information concerning the
regulations applicable to him and to appoint a capable ser-
vice provider to carry out this test!