Operating Instructions
Table Of Contents
- 1 Supply
- 2 Safety
- 3 Product
- 4 Charging process
- 5 Operation
- 6 Disposal and recycling
- 7 Maintenance/problem treatment
- 8 Technical data
- 9 Warranty
- 10 Standards/regulations
Maintenance/problem treatment
7 - 2
LUDWIG HOOK / 06/10/2020 / Ludwig System GmbH & Co KG; 83435 Bad Reichenhall, Germany / Tel.: +49 8651 7656730
7.1.2 Function check and cleaning
WARNING
m
At least once every charging cycle.
At least once per deployment:
• check for detectable external damage and
faults!
• check for wear on the locking pin (1) and hook
(3)!
• Carry out a function check!
Immediately report any changes (including battery behav-
ior) to the department/person responsible! Faults must be
eliminated immediately!
Image 7-2 Function check
Function check and cleaning
Item Name Interval
1 Mechanism locking pin. daily
a) By pressing the operating button and the actuation
button in the correct sequence on the radio remote
control (locking pin moves in the housing) the LUD-
WIG HOOK opens up.
b) Check movements of the locking pin (1) by loading
the hook (3).
2 Check the movement of the safety latch (2). daily
3 Check the movement of the hook (3). daily