Operating Instructions

Table Of Contents

Operation

5 - 22

LUDWIG HOOK / 06/10/2020 / Ludwig System GmbH & Co KG; 83435 Bad Reichenhall, Germany / Tel.: +49 8651 7656730

5.8 Releasing the load by radio

5.8.1 Single actuation

 Hold down the operating button (A) and, within 0.5 sec., push one of

the 4 desired actuation buttons (B).

• Red LUDWIG HOOK

• Blue LUDWIG HOOK

• Green LUDWIG HOOK

• Yellow LUDWIG HOOK

 Result: The hook on the color assigned LUDWIG HOOK releases the

load with a delay of approx. 2 secs.

Image 5-25 Single actuation

HINWEIS

NOTICE

Wrong usage.

Actuation in reverse sequence (i.e. first actuation button (B)

and then operating button (A) or simultaneous actuation of

both buttons) will result in no radio signal being sent to the

LUDWIG HOOK. This condition is indicated by a flashing

red LED.

Remedy:

• Wait until the LED goes out and carry out correct

actuation again.