Operating Instructions
Table Of Contents
- 1 Supply
- 2 Safety
- 3 Product
- 4 Charging process
- 5 Operation
- 6 Disposal and recycling
- 7 Maintenance/problem treatment
- 8 Technical data
- 9 Warranty
- 10 Standards/regulations
Operation
5 - 19
LUDWIG HOOK / 06/10/2020 / Ludwig System GmbH & Co KG; 83435 Bad Reichenhall, Germany / Tel.: +49 8651 7656730
5.6.2 Check the locking pin
WARNING
m
Locking pin!
Loads must not be suspended if the locking pin does not
come out of the housing completely!
Avoidance:
• Clean the area around the locking pin in the
event of dirt contamination!
• Check the hook and locking pin for wear.
Send the LUDWIG HOOK to the manufac-
turer if there are signs of wear!
Image 5-22 Check the locking pin
WARNING
m
Locking pin.
If the locking pin does not move to a position of "safe lock",
it moves back to the starting position, for safety reasons,
causing the LUDWIG HOOK XL to open.
Measures:
• In this case, repeat the locking process. If you
cannot achieve safe locking, contact the manu-
facturer or send in the LUDWIG HOOK.