Operating Instructions
Table Of Contents
- 1 Supply
- 2 Safety
- 3 Product
- 4 Charging process
- 5 Operation
- 6 Disposal and recycling
- 7 Maintenance/problem treatment
- 8 Technical data
- 9 Warranty
- 10 Standards/regulations
Operation
5 - 13
LUDWIG HOOK / 06/10/2020 / Ludwig System GmbH & Co KG; 83435 Bad Reichenhall, Germany / Tel.: +49 8651 7656730
5.5 Before starting work
5.5.1 Check radio remote control
5.5.1.1 Carry out tests
(see chapter 2 “Barrier-free environment for radio remote control” on
page 2 - 13).
see chapter 2 “Check radio frequency” on page 2 - 14
5.5.1.2 Rubber protection sleeve (option)
With the optional rubber protection sleeve, the radio remote control is
protected all round from impact.
HINWEIS
m
HINWEIS
m
HINWEIS
m
NOTICE
Damage to the remote control.
Operation without connected antenna on the radio remote
control is not permitted!
Avoidance:
• Check that the antenna is positioned and se-
cured with loctite.
• Check there is no damage on remote and anten-
na before operating!
Image 5-16 Rubber protection sleeve